Tempered Glass Table with Different Design
Tempered glass is made by forming compressive stress on the surface of the glass and heating the glass up to its intenerating temperature and then make the glass uniform cooling quickly.During the process of cooling, the exterior part of the glass is solidified because of the rapid cooling, while the interior part of the glass shrinks because of slow cooling, then forming compressive stress on the surface of the glass and tensile stress inside the glass, thus improving the intensity and heat stability of the glass.Clear tempered glass can be with holes or cutouts/hinges/grooves/notch and processed into tempered laminated glass, tempered insulated glass, etc.
Standard:EN 12150;ASTM 1048;BS 6206:1918;GB 15763.2-2005;AS/NZS 208:1996
Tempered glass is safety glass, which is widely used as window glass, door glass, curtain wall glass, fencing glass in buildings, hotels, curtain wall, etc.
Flat tempered glass 3300*12800mm
Bent tempered glass 3000*5000mm, R=1500mm
Considering the characteristics of clear tempered glass, glass size should be confirmed before making production.Once clear tempered glass size is confirmed, tempered glass can not be made mechanical treatment any more, and otherwise, it will be broken.
Clear tempered glass has a very good performance of anti-curve, anti-impact intensity, 3 to 6 times better than normal glass.Clear tempered glass can afford pressure over 95MPa on the surface.Tempered glass has high stability even under temperature change of 200-300 centigrade, while normal glass can only afford change of 70-100 centigrade.Clear tempered glass becomes small sand shape if tempered glass is broken under big forces, which guarantee safety and less loss.
Safety performance:Clear tempered glass will appearance hurtless obtuse angles when breakage.
Strength performance:Four times more than ordinary glass.
Heat stability performance:Three times more than ordinary glass, could bear the temperature change about 200°C.
2.Tempered glass has 4-5 times strength than ordinary glass
4.Generously satisfy with different clients' requirement to meet different designs
Clear tempered glass is often referred to as safety glass because it is more resistant to breakage than normal float glass.Yet if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.
GB 15763.2, Chinese standard.
EN 12150.1, European standard.
EN 12600, European standard.
ANSI Z97.1, American standard.
AS/NZS 2208, Australian standard.Contact us: Xanthe
Qingdao Creation Classic Glass Co.,Ltd.
Mobile: +86 18854802265
Website: www.creationclassic.comAddress: No.3263,Linghai Road,Lingshanwei Street Agency,Huangdao District,Qingdao City, China